Product ID:KLIX MAX AND SILICONE REMOVER
MSDS Date:02/03/1982
FSC:6850
NIIN:00F001955
MSDS Number: BBKGB

ACME QUALITY PAINTS COMPANY

101 PROSPECT AVENUE
CLEVELAND, OH 44101-5000

Emergency Phone: 216-566-2917

Info Phone: 216-566-2902

Cage: OOOO2

ACME QUALITY PAINTS COMPANY

Telephone: (216) 566-2917

Cage: OOOO2

AROMATIC NAPHTHA

CAS: 8030-30-6

Fraction By Weight: <5%

ACGIH TLV: 100 PPM

TOLUENE (IARC CARC- GROUP 3) *97-2*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

DIPENTENE, P-METHA-1,8-DIENE

CAS: 138-86-3

RTECS: OS8100000

Fraction By Weight: <5%

ACGIH TLV: 100 PPM

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *97-2*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

MINERAL SPIRITS, PETROLEUM SPIRITS *97-2*

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 80%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE IRRITATION.
INHALATION: MAY CAUSE UPPER RESPIRATORY SYSTEM IRRITATION. IN A
CONFINED AREA, VAPORS IN HIGH CONCENTRATION ARE ANESTHETIC.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, LIGHTHEADEDNESS, STAGGERING GAIT.

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. KEEP WARM
& QUIET. EYES/SKIN: FLUSH W/COPIOUS QUANTITIES OF WATER FOR 15
MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:50F
Lower Limits:0.7
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SHOULD
BE USED TO KEEP FIRE EXPOSED CONTAINERS. COOL.

Spill Release Procedures:REMOVE IGNITION SOURCES. VENITLATE & REMOVE
W/INERT ABSORBENT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
DON'T TRANSFER TO OTHERS CONTAINERS FOR STORAGE. KEEP AWAY FROM
IGNITION SOURCES.
Other Precautions:USE ONLY W/ADEQUATE VENTILATION. APPLICATION TO HOT
SURFACES REQUIRES SPECIAL PRECAUTIONS. USE APPROVED BONDING &
GROUNDING PROCEDURES. AVOID BREATHING VAPOR & SPRAY MIST. DON'T
TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:WEAR NIOSH/MESA APPROVED RESPIRATOR IF
ENGINEERING & ADMINISTRATIVE CONTROLS OF AIR CONTAMINANTS AREN'T
FEASIBLE.
Ventilation:LOCAL EXHAUST: PREFERABLE. MECHANICAL (GENERAL):
ACCEPTABLE. SPECIAL: REQUIRED TO KEEP Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES W/UNPERFORATED SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:240-395F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME & OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:BY FIRE: CO & CO2.

Waste Disposal Methods:INCINERATE IN APPROVED FACILITY IAW/FEDERAL,
STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.